All frames are machined to provide channels for passage of wires and slots for cantilevering storages and worktops. They are joined to each other with standard M6 fastners.

Frames are supplied in a uniform thickness of 75 mm preassembled in 4 heights -single module (525 mm);two module high (1135 mm);two and a half module high(1400 mm)and three module high(1600 mm).

The ELEMENT framework is extremely stable and does not need any grouting on the floor except for long unsupported walls, which require a return frame at the end.

ELEMENT framework allows configuration of differing heights within the same workstation to give a staggered look. Each frame except 'Single module high' is supplied with a skirting with 12 mm leveling bolts which allow 50 mm adjustment. The leveling bolts are concealed by skirting plates

Fabric Wrapped , Pre -lam , Pinnable , Veneer , Painted ,Accoustic , Fabric Wrapped Steel & Painted Steel.(High pressure laminates on tiles can be offered as an option).

Facia tiles are attached to the frame by a unique patented clip-on system which although hidden ,can be easily unlatched with flat blade tool for removal . However without deliberate action,tiles do not come out.

All tiles are fitted with gaskets to the frames to minimize sound and dust transmission .Pinnable boards are prefitted with support frames to add rigidity.

The use of laminated board ensures negligible warpage, Close dimensional tolerances giving a pleasing & uniform appearance and extremely smooth edges.

The beltline delivery & knee level delivery consists of three parts.

Power Beam: To accommodate wires and switches, switch plates are directly mounted on this section while with the help of M3 self tapping screws which slide in the groove provided in the section .

Power beam thickness is half the frame width such that switches can be provided either on one or both sides by using one or two power beams fitted back to back.

Switch Board Plate: These are supplied with cutouts corresponding to MK make switches .They are also available for AT & T (RJ11&RJ45)outlet .Each cutout accommodates 3 Modules and each cover plate comes with standard 3 cutouts on left & one on right side. Switches are flush mounted. Special switches can also be custom fitted on the cover plate and / or on tiles. Switches are not supplied with switch board plates and have to be provided by the client.

These slots are covered with ELEMENT blank plates which come factory fitted as standard. Specific requirement of the client have to be indicated at the time of ordering. Cover sections can be attached on one or both sides of frame wall.

Cable Carriers: These are snap fitted into the interior bottom side of center beam of the frame to provide neat harnessing of pass through wiring.

This wire delivery system offers tremendous flexibilities as it can be shifted like any other component and does not involve any cutouts to be made on fasica tiles.

Wire management is much neater as access cables are held by cable carriers.

The cover plate can be easily unlatched to allow wiring repairs.